9999 急啊

liudepei

#1   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'U3'. Pin edits were lost.

#2   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L5'. Pin edits were lost.

#3   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L4'. Pin edits were lost.

#4   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L2'. Pin edits were lost.

#5   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'L1'. Pin edits were lost.

#6   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'CN4'. Pin edits were lost.

#7   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'CN1'. Pin edits were lost.

#8   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C40'. Pin edits were lost.

#9   WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C24'. Pin edits were lost.

#10  WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C44'. Pin edits were lost.

#11  WARNING(304) Device/Symbol check warning detected.

Symbol changed for 'C41'. Pin edits were lost.

這些什么問題啊﹐什么原因引起的啊﹐﹐﹐高手﹐﹐﹐急啊

wudongzhou

估计你的封装做的有问题

看看你的PIN脚，是不是有一些属性没有设置好

xipanlong

database chesk以下看看，你的零件好像都没属性了。

[此贴子已经被作者于2007-11-21 16:01:52编辑过]

liudepei

謝謝各位告知﹗﹗

但是﹐你們說的都有漏洞﹗

所先﹐這是導入網絡表時出的錯﹗

第二﹐其它元件（如L20)就沒有這種問題﹐所以本人認為FOOTPRINT就應該沒問題﹗況且FOOTPRINT能有什么屬性（無非就是pin要定義其各層﹐foorprint要有Label而已）

eric57

你牛！

提问题都不跟人家说是什么background，谁知道这些是什么时候出的，什么地方出的，造成什么结果啊？你说清楚了自然就好解决了。

另外，这些都是warning，没一个error，谁说是错误啦？出warning很平常，可以正常使用。

一般导网表都出warning。直接ignore

liudepei

還是謝謝告知﹗﹗﹗（這都是我的錯﹐在些表示歉意）

但是﹐warning都出來﹐且不管有沒有影響﹐我至少應該warning為什么出現吧﹖---向各位高手請教了﹗﹗謝謝﹗﹗

（導NETLSIT時是會出現warning﹐但是我知道warning在哪）