- 积分
- 691
- 兑换点
- 点
- 声望度
-
- 金钱
- 元
- 银行存款
- 元
- 贡献度
-
- 精华
|
楼主 |
发表于 2003-4-8 14:44:00
|
显示全部楼层
但是我用它转进BRD文件里时并没错,却看不到元件呢?
我用的是ALLEGRO 14.2 --ORCAD 9.2.3转入网络表时错误提示如下:
Tue Apr 08 09:56:41 2003 Page 1
Allegro NETLIST IN Log File
===========================================================
Netlist File Name: 'D:\a3\netlist.log' Layout File Name: 'D:\USR\04363a.b~
rd\unnamed.brd'
===========================================================
{ Using PSTWRITER 14.2 P007Apr-08-2003 at 09:56:27 }
^
WARNING: Non-comment line preceding first keyword will be ignored.
-------------------------------------------------------------------------------
#1 Warning [ALG0016] Part Name " C0603" is renamed to "C0603".
^
WARNING: Non-comment line preceding first keyword will be ignored.
-------------------------------------------------------------------------------
===========================================================
End of NETLIST IN Syntax/Logic Check
===========================================================
Total Netlist Warnings = 2.
Total Netlist Errors = 0.
===========================================================
Total Combined Netlist and Device File Warnings = 2.
Total Combined Netlist and Device File Errors = 0.
===========================================================
End of Allegro NETLIST IN Log
===========================================================
===========================================================
Starting gate assignment. Tue Apr 08 09:56:41 2003
Assigning gates of drawing D:\USR\04363a.brd\unnamed.brd
Gates of differing rooms will not be assigned to the same component.
Gate assignment will use empty slots in existing components.
STEP I
STEP II
Finished with gate assignment. Tue Apr 08 09:56:41 2003 |
|