[求助]错误？

snoopy · 发表于 2003-5-14 16:16:00

提示: 该帖被管理员或版主屏蔽

lijian1626 · 发表于 2003-5-14 19:12:00

请把真个DRC文件传上来看看。

snoopy · 发表于 2003-5-15 10:08:00

整个DRC文件如下，请斑竹帮忙尽快解答，本人不胜感激。：）
Protel Design System Design Rule Check
PCB File : Documents\Copy (1) of xppwl
Date    : 14-May-2003
Time    : 15:26:56

Processing Rule : Clearance Constraint (Gap=9mil) (On the board ),(On the board )
Rule Violations :0

Processing Rule : Short-Circuit Constraint (Allowed=Not Allowed) (On the board ),(On the board )
Rule Violations :0

Processing Rule : Broken-Net Constraint ( (On the board ) )
Violation       Net 4:GND1
   Warning - Connection to overlapping split planes
Violation       Net 5:WY-15V
   Warning - Connection to overlapping split planes
Violation       Net 7:ZL-15V
   Warning - Connection to overlapping split planes
Violation       Net 8:ZL+15V
   Warning - Connection to overlapping split planes
Violation       Net 14:HZ
   Warning - Connection to overlapping split planes
Violation       Net 20:A2X
   Warning - Connection to overlapping split planes
Violation       Net 21:A1X
   Warning - Connection to overlapping split planes
Violation       Net 22:GND2
   Warning - Connection to overlapping split planes
Violation       Net 28C:RLZ
   Warning - Connection to overlapping split planes
Violation       Net NetC1_2
   Warning - Connection to overlapping split planes
Violation       Net NetC4_1
   Warning - Connection to overlapping split planes
Violation       Net NetC7_1
   Warning - Connection to overlapping split planes
Violation       Net NetC10_2
   Warning - Connection to overlapping split planes
Violation       Net NetC206_1
   Warning - Connection to overlapping split planes
Violation       Net NetC207_1
   Warning - Connection to overlapping split planes
Violation       Net NetC208_1
   Warning - Connection to overlapping split planes
Violation       Net NetC2010_1
   Warning - Connection to overlapping split planes
Violation       Net NetN3_2
   Warning - Connection to overlapping split planes
Violation       Net NetN3_6
   Warning - Connection to overlapping split planes
Violation       Net NetR2_2
   Warning - Connection to overlapping split planes
Violation       Net NetR4_2
   Warning - Connection to overlapping split planes
Violation       Net NetR5_1
   Warning - Connection to overlapping split planes
Violation       Net NetR6_1
   Warning - Connection to overlapping split planes
Violation       Net NetR10_1
   Warning - Connection to overlapping split planes
Violation       Net NetR12_2
   Warning - Connection to overlapping split planes
Violation       Net NetR33_2
   Warning - Connection to overlapping split planes
Violation       Net NetR201*_1
   Warning - Connection to overlapping split planes
Violation       Net NetR207*_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2013*_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2015_2
   Warning - Connection to overlapping split planes
Violation       Net NetR2018_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2020_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2021_2
   Warning - Connection to overlapping split planes
Violation       Net NetR2025*_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2030_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2031*_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2033_2
   Warning - Connection to overlapping split planes
Violation       Net NetR2035_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2036_1
   Warning - Connection to overlapping split planes
Violation       Net NetR2044_2
   Warning - Connection to overlapping split planes
Violation       Net NetR2047_1
   Warning - Connection to overlapping split planes
Violation       Net NetV1_B
   Warning - Connection to overlapping split planes
Violation       Net NetV1_C
   Warning - Connection to overlapping split planes
Violation       Net NetV1_E
   Warning - Connection to overlapping split planes
Violation       Net NetV2_B
   Warning - Connection to overlapping split planes
Violation       Net NetV2_C
   Warning - Connection to overlapping split planes
Violation       Net NetV2_E
   Warning - Connection to overlapping split planes
Violation       Net NetV4_E
   Warning - Connection to overlapping split planes
Violation       Net NetV5_E
   Warning - Connection to overlapping split planes
Violation       Net NetV6_B
   Warning - Connection to overlapping split planes
Violation       Net NetV6_E
   Warning - Connection to overlapping split planes
Violation       Net NetVD1_1
   Warning - Connection to overlapping split planes
Violation       Net NetVD2_2
   Warning - Connection to overlapping split planes
Violation       Net NetVD205_2
   Warning - Connection to overlapping split planes
Violation       Net NetVD206_2
   Warning - Connection to overlapping split planes
Violation       Net NetVD207_1
   Warning - Connection to overlapping split planes
Violation       Net NetVD209_2
   Warning - Connection to overlapping split planes
Violation       Net NetVT6_d
   Warning - Connection to overlapping split planes
Violation       Net NetVT6_g
   Warning - Connection to overlapping split planes
Violation       Net NetVT8_d
   Warning - Connection to overlapping split planes
Violation       Net NetVT8_g
   Warning - Connection to overlapping split planes
Violation       Net NetVT10_d
   Warning - Connection to overlapping split planes
Violation       Net NetVT10_g
   Warning - Connection to overlapping split planes
Violation       Net NetVT12_d
   Warning - Connection to overlapping split planes
Rule Violations :64
Time Elapsed       : 00:00:04

步行者 · 发表于 2003-5-15 13:24:00

内层有问题吧？还是DRC设置的问题？

snoopy · 发表于 2003-5-15 13:49:00

内层应该没问题的，
这已经做过许多次了，
我怀疑DRC设置的问题，但是找不出来原因。
不知该怎么解决，
忽略吧又怕出来的板子有问题，
那位见过这个问题快帮帮忙！：）

步行者 · 发表于 2003-5-15 14:04:00

看看是违反了哪条设计规则和应用这条设计规则的有哪些？其中有不违反这条设计规则的么？比较一下。还真没有遇到这样的问题，上面的也只是我能想到的一点。高手呢？怎么都不来？

步行者 · 发表于 2003-5-15 14:14:00

protel的内层处理是会经常出问题，所以我一般习惯在内层直接缚铜。如果确认没有问题的话可以忽略吧。呵呵建议对内层重新分。
要不传上来大家看看？？呵呵

qingwrw · 发表于 2003-5-15 14:25:00

你用的99se 还是dxp？？

lijian1626 · 发表于 2003-5-15 18:55:00

对啊，肯定是内层的问题，不过没有你的图纸，我们也解决不了啊。

		自动登录	找回密码
密码			注册

snoopy snoopy 当前离线积分 774 兑换点点声望度金钱元银行存款元贡献度精华中级会员, 积分 774, 距离下一级还需 226 积分头像被屏蔽	发表于 2003-5-14 16:16:00 \| 显示全部楼层 \|阅读模式提示: 该帖被管理员或版主屏蔽

	回复使用道具举报