请求帮助 ORCAD生成网表报错

土豆泥

#1 Error   [ALG0062] Value for property PCB Footprint contains carriage return for J11.
#2 Error   [ALG0062] Value for property PCB Footprint contains carriage return for J1.
#3 Error   [ALG0062] Value for property PCB Footprint contains carriage return for J2.
#4 Error   [ALG0062] Value for property PCB Footprint contains carriage return for J3.
#5 Error   [ALG0062] Value for property PCB Footprint contains carriage return for J4.
#6 Error   [ALG0050] Duplicate Pin Name "NC" found on Package AD9705 , U26 Pin Number 7: SCHEMATIC1, 09: TGC AND CW SUM/ADCS (5.35, 1.50). Please renumber one of these.
#7 Error   [ALG0050] Duplicate Pin Name "NC" found on Package AD9705 , U26 Pin Number 8: SCHEMATIC1, 09: TGC AND CW SUM/ADCS (5.35, 1.50). Please renumber one of these.
#8 Error   [ALG0050] Duplicate Pin Name "NC" found on Package AD9705 , U26 Pin Number 9: SCHEMATIC1, 09: TGC AND CW SUM/ADCS (5.35, 1.50). Please renumber one of these.
#9 Error   [ALG0050] Duplicate Pin Name "DCOM" found on Package AD9705 ,
U26 Pin Number 26: SCHEMATIC1, 09: TGC AND CW SUM/ADCS (5.35, 1.50). Please renumber one of these.
#10 Aborting Netlisting... Please correct the above errors and retry.

yshang

英文写的很清楚了：
J1等PCB Footprint属性中含有非法字符（回车键）；
U26（AD9705）的有重复的NC和DCOM管脚。

土豆泥

但已经改了还是这样的报错

yshang

再确认一下是否正确修改了吧，你遇到的问题很普遍的，都是在建库的时候不规范，导致无法正常导出网表。

higeen

自己对着log一个一个把错误都排查一下不就行了

2楼说的也够清楚了

楼主看不懂洋文？现在工具也很多啊，可以借助网络和字典啊