导网表失败，高手指导一下，谢谢

cuizb2583

CADENCE16.5开始导网表正常,在原理图其中一页增加page属性后出现：
DRC 正常通过，导网表出现一些告警，清高手帮忙分析一下，谢谢
log提示有告警：
f:\data\cca\x39\allegro
Configuration File:
D:\Program Files\Cadence\SPB_16.5\tools\capture\allegro.cfg

Spawning... "D:\Program Files\Cadence\SPB_16.5\tools\capture\pstswp.exe" -pst -d "f:\data\cca\x39\al539_v12_20120628.dsn" -n "f:\data\cca\x39\allegro" -c "D:\Program Files\Cadence\SPB_16.5\tools\capture\allegro.cfg" -v 3   -l 31 -s "" -j "PCB Footprint" -hpath "HPathForCollision"
#1 WARNING(ORCAP-36050): No pins are present in PCB1. Ignoring this component in netlist.
#2 WARNING(ORCAP-36050): No pins are present in PCB2. Ignoring this component in netlist.
#3 WARNING(ORCAP-36050): No pins are present in FS5. Ignoring this component in netlist.
#4 WARNING(ORCAP-36006): Part Name "LCD-37X05_0_LCD-37X05_LCD_37_0.5" is renamed to "LCD-37X05_0_LCD-37X05_LCD_37_0.".
#5 WARNING(ORCAP-36030): Value of Property "Device" missing from instance L1: AL539, 13)POWER (259.08, 30.48).
#6 WARNING(ORCAP-36006): Part Name "STM32F103VBT6_8_TQFP100_STM32F103" is renamed to "STM32F103VBT6_8_TQFP100_STM32F1".
#7 WARNING(ORCAP-36006): Part Name "SN74LVC1G125DBV_SOT-23-5L_SN74LVC1G125" is renamed to "SN74LVC1G125DBV_SOT-23-5L_SN74L".
#8 WARNING(ORCAP-36006): Part Name "MX25L6465EM2I-10G_SOIC8-L_MX25L6465EM2I-10G" is renamed to "MX25L6465EM2I-10G_SOIC8-L_MX25L".
#9 WARNING(ORCAP-36006): Part Name "MCP2551-I/SN_SOIC-8_MCP2551-I/SN" is renamed to "MCP2551-I/SN_SOIC-8_MCP2551-I/S".
#10 WARNING(ORCAP-3600
6): Part Name "XC6206PXX2MRN_SOT-23_XC6206P182MRN" is renamed to "XC6206PXX2MRN_SOT-23_XC6206P182".
#11 WARNING(ORCAP-36006): Part Name "MX25L12845EMI-10G_SOIC-16_MX25L12845EMI-10G" is renamed to "MX25L12845EMI-10G_SOIC-16_MX25L".
#12 WARNING(ORCAP-36006): Part Name "XC6222D33BPR-G_SOT-89-5_XC6222D33BPR-G" is renamed to "XC6222D33BPR-G_SOT-89-5_XC6222D".
Scanning netlist files ...

Loading... f:\data\cca\x39\allegro/pstchip.dat

Loading... f:\data\cca\x39\allegro/pstchip.dat

Loading... f:\data\cca\x39\allegro/pstxprt.dat
ERROR(SPCODD-433):
                        Error at line 32 in file f:\data\cca\x39\allegro/pstxprt.dat. Error in syntax.

ERROR(SPCODD-382): Error at line 32 in file f:\data\cca\x39\allegro/pstxprt.dat. Error loading the parts list file

#13 ERROR(ORCAP-36026): Unable to read logical netlist data.

cuizb2583

问题已经解决，但有些不能理解。具体原因是电容里面有个电压属性，其值为50V，直接将其删除即可，但是改成50或V都不行，删除此属性也可以，就是有些不理解。另外edit-browse-parts更改电压属性后会出现器件双属性（就电容的原来所有属性都是两个，一个正常，一个背景是黄的，内容一样）

另外说明一下 line 32有些误导，我原理图删除的只有1页时log总共5行，实际提示line12异常，通过记事本定位line12，提示超出总行数，而且line32也没有看出异常