PCB论坛网

 找回密码
 注册
查看: 2268|回复: 0

开源硬件地址小汇总

[复制链接]
发表于 2019-1-1 20:50:54 | 显示全部楼层 |阅读模式
https://en.wikipedia.org/wiki/Arduino

[url]https://en.wikipedia.org/wiki/Raspberry_Pi


https://en.wikipedia.org/wiki/Li ... _compatible_systems

https://microbit.org/guide/quick/
https://tech.microbit.org/hardware/
https://tech.microbit.org/hardware/powersupply/
摘录:Battery Powering
When powered from a battery plugged into the top battery connector, the KL26 interface chip is not powered up, and the System LED will not be turned on. If your code does not display anything on the display, this might look like the micro:bit is not working, but it is.   Because the nRF51822 is powered almost directly (there is only one BAT60 diode between the supply and the nRF51 power rails), a fully charged LiPoly battery that is specced to reach 4.2V will be give greater than the 3.9V maximum that the nRF51822 can withstand see below 。There is further information about the battery connection and use in our knowledgebase。
https://github.com/bbcmicrobit/
https://github.com/bbcmicrobit/hardware
Edge Connector:  https://tech.microbit.org/hardware/schematic/

microbit学习交流微信群关联:
社区网址:http://www.micropython.org.cn
社区PythonEditor中文版:https://micropython.top
社区makecode扩展:https://github.com/microbit-makecode-packages
社区microbit的python驱动库:https://github.com/shaoziyang/microbit-lib
社区网店:https://shop199324061.taobao.com/

http://wiki.dfrobot.com.cn
[资源下载]【Mind+】图形化编程系列教程 持续更新
http://mc.dfrobot.com.cn/forum.p ... &fromuid=724121
光环板http://docs.makeblock.com/halocode/zh/

Makeblock:
http://docs.makeblock.com/halocode/zh/
https://tnext.org/2083.html

http://learn.kittenbot.cn/zh_CN/latest/index.html
http://learn.kittenbot.cn/zh_CN/ ... k/Powerbrick04.html
https://kittenbot.github.io/meowbit-tutorials
http://learn.kittenbot.cn/zh_CN/latest/micropython/index.html

https://mpython.readthedocs.io/z ... l?from=groupmessage
https://mpython.readthedocs.io/zh/latest/board/hardware.html
乐鑫ESP32 WROOM 系列:https://www.espressif.com/zh-han ... p-wroom-32/overview
https://docs.espressif.com/proje ... eference/index.html[/url]


纠正管脚定义(附错误位置标注)





本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?注册

x
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

Archiver|小黑屋|手机版|PCB设计论坛|EDA论坛|PCB论坛网 ( 沪ICP备05006956号-1 )

GMT+8, 2020-5-26 12:34 , Processed in 0.073372 second(s), 18 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

快速回复 返回顶部 返回列表