|
OrCAD R9电路版设计
共有七个章节
第一章共有12个档案
1-1 电路设计流程······················································ 1-2
1-2 建立电路图专案···························································1-4
1-3 绘制电路图···································································1-10
1-3-1 搜寻及布置零件··············································1-10
1-3-2 多组零件放置及编辑技巧······························1-17
1-3-3 放置电源及接地符号······································1-20
1-3-4 連接线路·························································1-24
1-3-5 调整电路图纸与存档······································1-29
1-4 电路图至电路板之界面················································1-31
1-5 建立电路板专案···························································1-38
1-6 定义板框及布置零件····················································1-44
1-7 自动布线与全面拆线············································ 1-52
1-8 单层板布线························································· 1-53
项目：
在Capture 裡开启项目、管理项目的基本动作。
电路图裡的主角之一，就是零件，而零件取自零件库。至
于什么零件在什么零件库？就是一大问题！对于初学者而
言，搞定零件，几乎就掌握电路绘图的大半了！在此必须
学得零件库的基本操作，包括挂卸零件库、零件搜寻等。
电路图编辑环境的基本操作，包括屏幕显示比例的缩放、
取用零件、线路連接技巧与自动边移设定、电源符号的操
作、图面调整与图纸的设定等。
建构属性置换文件，并执行属性置换
Layout Plus 电路板设计的前置作业，以及电路图与电路板
之界面。
电路板零件布置是电路板设计中，比较麻烦，却不可避免
的程序，在此将介绍基本电路板零件布置技巧。
快速自动布线与拆线的方法。
单层板设计的设定方法。 | 
发表于 2005-5-5 22:29:25
楼主